A Detailed Look of iPhone 15 Pro Max Motherboard


The iPhone 15 Pro Max comes with a more powerful CPU, a 5x telephoto camera, and it's easier to be repaired. It has set a new standard in smartphone technology. To check if these features are as good as they claim, we took the phone apart.  Therefore,we can uncover all its secrets and answer any questions that technicians and users might have. In this blog, we're going to take a close look at the details of this advanced device. So, let's  get started!

iPhone 15 Pro Max Screen and Bezel

The screen design of the iPhone 15 Pro Max is quite different from the previous model. The bezel on this new model is much narrower than before, which is a big improvement. Also, there's a new white latex material added between the screen cover and the bezel,which might be to make the screen more waterproof. But we should be aware that  the white latex could make it harder to refurbish the screen.

iPhone 15 Pro Max Motherboard

Back Side of the iPhone 15 Pro Max Motherboard
The back of the iPhone 15 Pro Max motherboard looks smooth and clean. There's a wireless charging connector on it. Plus,there's an NFC chip and an amplifier IC on the top side. These components enable to improve the phone's connectivity and sound quality.

Front Side of the iPhone 15 Pro Max Motherboard
The layout on the front side of the iPhone 15 Pro Max motherboard has changed a lot. Notably, the Nand has been moved to the left side of the motherboard,which will help the  motherboard repairs much easier in the future.

iPhone 15 Pro Max Battery
The iPhone 15 Pro Max has an amazing battery with a capacity of 4,422mAh/17.1Wh, which gives it great endurance. Compared to the iPhone 14 Pro Max, the battery capacity has increased a bit. This means you can watch videos for up to 29 hours and listen to music for an incredible 95 hours. The iPhone 15 Pro Max stands out because of its large battery and great performance, which ensure  you enjoy your favorite content for a long time.

Questions and Answer

View all
How to use the hackrf one portapack H2?

How to use the hackrf one portapack H2?

Adminquecoo
If you have a HackRF One with the PortaPack H2, you can do the following. Assembly and Initial Setup Adding the PortaPack H2 to the HackRF One: The...
How to use the soldering iron and clean tip of soldering iron?

How to use the soldering iron and clean tip of soldering iron?

Adminquecoo
The main handheld tool used in the soldering process is a soldering iron, which is used to heat a little amount of solder, or fusible metal alloy, ...
How Much If I buy one Soldering Iron Cost?

How Much If I buy one Soldering Iron Cost?

Adminquecoo
There is an unwritten set of practices you need to adhere to when using iPhone repair tools.So,in order to ensure that you are properly able to fix...
What do I need to keep in mind when using these cell phone repair tools?

What do I need to keep in mind when using these cell phone repair tools?

Adminquecoo
  There is an unwritten set of practices you need to adhere to when using iPhone repair tools.So,in order to ensure that you are properly able to f...
What microcontroller is used in the QUICKO T12 soldering iron that fits the Milwaukee?

What microcontroller is used in the QUICKO T12 soldering iron that fits the Milwaukee?

Adminquecoo
The T12 soldering iron adapted to Milwaukee uses the following microcontrollers: STC15F2K60S2 : T12 soldering iron control board based on STC15F2K6...
Why your T12 soldering iron can't melt old solder?

Why your T12 soldering iron can't melt old solder?

Adminquecoo
7 Reasons You may not be Able to Melt Old Solder with Your T12  Soldering Iron