Is the screen of the iPhone XS Max broken? Refurbishing Screen Solution
A cracked screen on your iPhone XS Max is not only aesthetically displeasing, it can also lead to damage to the touchscreen and display. Fortunately, it can be fixed through a professional repair team. Replacing the iPhone XS Max screen requires following a series of detailed and precise steps to ensure that the process is both safe and efficient. Is the screen of the iPhone XS Max broken? Refurbishing Screen Solution!Below are the exhaustive steps to replace the iPhone XS Max screen:

1. Separate the screen from the phone
-Heat the lower edge: use a heat gun to heat the lower edge of the iPhone for about a minute to soften the adhesive.
- Separate the screen from the back of the phone: Grasp and close the iSclack handle firmly and use the opening pick to separate the screen from the back of the phone.

2. Removing the Screen
- Remove bracket: Remove the screen bracket and pry up the battery connector from the socket on the logic board.
- Disconnect the cables: Use a spatula or your fingernail to disconnect the screen panel cable connector as well as the digitiser cable connector and lift carefully until the adhesive separates.Heating the lower edge of the iPhone. Use a ATTEN ST-862D Hot Air Gun and apply it to the lower edge of the iPhone for about a minute in order to soften up the adhesive underneath.
3. Replacing the Microphone
- Separate the adhesive holding the sensor: Use a heat gun to soften the adhesive holding the sensor and separate the microphone.
- Shake the ambient light sensor: Use titanium tweezers to shake the ambient light sensor and lift it out of the display recess.

4. Handling the Speaker Receiver
- Disconnect the flex cable: Disconnect the flex cable from the speaker receiver and remove the front sensor assembly.

5. Replacing the Broken Screen
- Replace the broken screen: Replace the broken screen and perform a functional test to ensure that everything is working properly, such as the display, Touch ID, and swipe-up operation.

How much does a DIY repair cost?
- COST ESTIMATE: The cost of a DIY repair usually includes the cost of the LCD screen and shipping costs (if any). If the iPhone XS MAX is still functional after a drop, you can purchase a new screen and repair the screen manually.

Third-party repair options
-Non-warranty cost: If the device is out of warranty, third-party repair shops will charge up to $329. Therefore, choosing to have your screen replaced or refurbished by a team of professionals is a much more affordable option.

In addition, please note the following when performing the above steps:

- Make sure to power off your iPhone before you begin. Use adhesive tape to prevent further breakage and also to avoid bodily harm during the repair process.
- Take extra care when heating to avoid damaging the screen glass or other sensitive parts.
- Be sure to keep the area between the screen and the back of the phone clean and dry during the procedure to prevent short circuits or other accidents.
- When replacing the microphone and speaker receiver, make sure that you do it in the right order and in the right way to avoid causing damage to other components.
Overall, replacing the iPhone XS Max screen is a relatively simple but cautious process. By following the steps and precautions outlined above, you will be able to successfully complete the screen replacement. Before doing so, it is recommended to back up all important data and remain patient and meticulous during the process to ensure that the whole replacement process goes smoothly. As frustrating as a cracked iPhone XS Max screen can be, fortunately, with the help of a professional repair team, you can restore your device to normal functionality. Whether you choose to fix it yourself or seek out a third-party repair service, the key is to ensure that you follow the proper repair steps and techniques to ensure safety and results. Also, considering the long-term maintenance costs, choosing an official or reputable third-party repair service provider will be a wise decision.

Questions and Answer

View all
How to use the hackrf one portapack H2?

How to use the hackrf one portapack H2?

Adminquecoo
If you have a HackRF One with the PortaPack H2, you can do the following. Assembly and Initial Setup Adding the PortaPack H2 to the HackRF One: The...
How to use the soldering iron and clean tip of soldering iron?

How to use the soldering iron and clean tip of soldering iron?

Adminquecoo
The main handheld tool used in the soldering process is a soldering iron, which is used to heat a little amount of solder, or fusible metal alloy, ...
How Much If I buy one Soldering Iron Cost?

How Much If I buy one Soldering Iron Cost?

Adminquecoo
There is an unwritten set of practices you need to adhere to when using iPhone repair tools.So,in order to ensure that you are properly able to fix...
What do I need to keep in mind when using these cell phone repair tools?

What do I need to keep in mind when using these cell phone repair tools?

Adminquecoo
  There is an unwritten set of practices you need to adhere to when using iPhone repair tools.So,in order to ensure that you are properly able to f...
What microcontroller is used in the QUICKO T12 soldering iron that fits the Milwaukee?

What microcontroller is used in the QUICKO T12 soldering iron that fits the Milwaukee?

Adminquecoo
The T12 soldering iron adapted to Milwaukee uses the following microcontrollers: STC15F2K60S2 : T12 soldering iron control board based on STC15F2K6...
Why your T12 soldering iron can't melt old solder?

Why your T12 soldering iron can't melt old solder?

Adminquecoo
7 Reasons You may not be Able to Melt Old Solder with Your T12  Soldering Iron