How to Use T12 A Cordless soldering Iron ?

Here are the general steps to use T12 A cordless soldering iron :

Power on
Insert the appropriate li-ion battery according to the soldering iron station's requirements. Then turn on the power switch.

Temperature setting
Use the temperature adjustment knob or button on the iron station to set the temperature as you need. The digital display will show the current temperature when you are settimg.

Preheating
After setting the temperature, wait for the iron station to heat up. The preheating time may vary depending on the model and the set temperature, usually it takes a few seconds .

Soldering
When the iron station reaches the set temperature, hold the soldering iron handle firmly and place the soldering tip on the joint to be soldered. Apply a small amount of solder wire to the joint, and let the solder melt and flow evenly around the joint to complete the soldering.

Standby and shutdown

If you need to take a short break during soldering, you can put the soldering iron tip on the stand. automatic standby or sleep function will work, the machine will enter standby mode after a period of inactivity to save power and prevent overheating. After finishing the whole soldering work, turn off the power switch and unplug the power cord or remove the battery.

In addition, for more T12 A cordless iron stations advanced functions, such as temperature staging, boost function, etc., you can refer to the product manual for specific operation methods.