Description
i2C Battery Flex Cable Repair Programmer for iPhone 11 12 pro max 13 14 Battery Data Copy Encryption Error Warning Pops Up Corrector
Features
The mainframe on sale now needs to be used with a flat cable. If necessary, the current model supports 11-11pro-11promax but there are traces after installation. Please pay special attention to this point.
Support the full range of 6-14PM models!
Read and mts data at the bottom of the battery
Online software update unlimited
Health and number of cycles changed
Supports offline and online operations
Running cycle efficiency increases automatically
Support charging voltage and current detection
Supports 8-14 PD fast charging
Operation steps:
1. Connect the data cable to the device and power it on
2. Place the battery tie to be activated on the seat
3.Battery data can be activated to complete.
Support PD 20W fast charging function
Efficient and fast charge,no damage to the battery,
30 minutes can be charged to 65% The charging current/voltage data
can be viewed in real time
Date modification is performed offline
You are advised to change the battery cell first and modify the battery data
1.Data can be modified directly for 6-XSMax models(To write standard underlying data or large-capacity underlying data, perform online operations)
2. For 11-14PM models, install an external battery cable to modify data.
Operation steps:
1. Fasten the battery to the seat of the device.
2. Set the mode to Data Read/Write mode.
3. Hold down the Switch key to modify data.
4. Click "OK" to burn after data modification.
5. Use a third-party non-original battery to guide the phone popover.
6. Install the battery with the modified data together with the external cable.
