Description
Six-chip UV Eprom Eraser Eraser EPROM Data Eraser Eraser UV Eprom Eraser Erase Ultraviolet Light Erasable Timer.
Note: A standard CN plug is included. You must get the plug adaptor ready on your own.
An all-purpose tool for erasing chip and EPROM data is the ultraviolet EPROM eraser. EPROM data can be erased with it. Six chips can be erased simultaneously with Eprom Eraser. EPROM Storage can be erased with this chip's UV EPROM eraser. All data can be erased in ten minutes. and before the chip is erased, the tape adhestive must be removed. eliminates up to eight user IDs and 40 PINs. IC with 32 pins and 28 pins simultaneously.
ultraviolet eraser for EPROMs tool for erasing EPROM data.
This EPROM Eraser uses ultraviolet light to destroy the EPROM chips. It looks good. excellent stability and beautiful structure.
Qualities:
Required power: AC 220V±20%
Operational Frequency: 43–57 Hz
Temperature range for operation: -10°C to 40°C
Relative working humidity: 20% to 90%
Before operating, please make sure the input voltage is correct!
User instructions: 1. Turn the power switch to "ON" (only for 6 pieces).
2. When the timer is in the "ON" position. The rubber is currently operating continuously.
3. To set the working period, rotate the timer in a clockwise direction. A cycle lasts for sixty minutes.
Note: A standard CN plug is included. You must get the plug adaptor ready on your own.
An all-purpose tool for erasing chip and EPROM data is the ultraviolet EPROM eraser. EPROM data can be erased with it. Six chips can be erased simultaneously with Eprom Eraser. EPROM Storage can be erased with this chip's UV EPROM eraser. All data can be erased in ten minutes. and before the chip is erased, the tape adhestive must be removed. eliminates up to eight user IDs and 40 PINs. IC with 32 pins and 28 pins simultaneously.
ultraviolet eraser for EPROMs tool for erasing EPROM data.
This EPROM Eraser uses ultraviolet light to destroy the EPROM chips. It looks good. excellent stability and beautiful structure.
Qualities:
Required power: AC 220V±20%
Operational Frequency: 43–57 Hz
Temperature range for operation: -10°C to 40°C
Relative working humidity: 20% to 90%
Before operating, please make sure the input voltage is correct!
User instructions: 1. Turn the power switch to "ON" (only for 6 pieces).
2. When the timer is in the "ON" position. The rubber is currently operating continuously.
3. To set the working period, rotate the timer in a clockwise direction. A cycle lasts for sixty minutes.