Description
Professional USB Digital V oltmeter QC3.0 PD V oltage C urrent P ower D etector M easurement Digital V oltmeter for Phone Motherboard Repair
Description:
It can be used to test the PD instrument, the table gives full consideration to the complexity of the physical interface updating when charging, diversity and charging of the agreement, will be the most common USB-A interface, Micro USB port, Type-C interface integrated together, in addition to the USB PD measurement professional, can also be used for the measurement of QC3.0/2.0 and other fast charge.
Specifications:
Product Series: POWER-Z
Product Type: KM001
Product Name: Portable USB PD Tester
Operating voltage: 3.6-20V Current:3-5A
Support Agreement: USB PD, Qualcomm QC3.0 / 2.0, MTK PE / PE +, Huawei FCP / SCP, Phone 2.4A, BC1.2, DCP
POWER-Z KT002 USB PD voltage current tester:
Specification:
1. 1.8-inch TFT display screen.
2. The screen has a gravity sensor.
3. Built-in buzzer.
4. Four languages: Simplified Chinese, Traditional Chinese, English, Japanese.
5. Full Pin interface, stronger compatibility, optimized for the special protocol of Huawei, oppo, OnePlus and other brand chargers, no need to match the original cable, it can be tested directly.
6. Support multiple protocols: USB PD3.0, PPD, QC2.0, QC3.0, FCP, SCP, SSCP, AFC, VOOC 4.0, support VOOC, DASH, WARP, ect.
POWER-Z KM003C Type-C tester:
Specifications:
1. Number of offline record groups: 4MB internal storage.
2. Capacity energy maximum group: 15-40.
3. Accuracy: 0.00003.
4. HD interface: Type-C. Test interface type: Type-C.
5. ADC: 20 Bit.
6. Screen: 1.54-inch, 240x240 resolution, IPS material, supports gravity sensing.
7. Power failure life: 5s.
8. Processor: for ARM Cortex-M4 192MHz.
9. Case material: CNC aluminum case.
10.Support PD3.1, English, Chinese language.
11. Operation type: Key
12. Power supply, communication port: Type-C (5V)
13. Interface internal resistance: about 20mΩ
14. Typical operating current: 15~50mA
15. Voltage accuracy: 0.00002V. Voltage range: 0-50V.
16. Current accuracy: 0.00003A. Current range: 0-6A
17. Operating temperature: -10 to 60°C.
18. Support Apple charger SN code reading.
19. Upper computer: new interface, 4K picture quality, 10 million data, 10,000,000 packet cathcing function.
Function :
1.Display voltage , current, power, mAh, mWh
2.Press the menu button can be transferred to the recording interface, you can set to store a variety of different capacity and energy data
3.Each stored data can be deleted and marked
4 .Set the recording time interval and maximum capacity
5.Automatic run of the rule setting, current threshold setting
6.End time setting
7.Display the information interface
8.Test line resistance function
Instruction:
It will be measured wire into the tester, followed by a load, the resistance will always beating, until the resistance is stable, the degree, is the size of the line resistance, and there are GOOD evaluation, let you know the wire is good Bad
You can set the waveform display refresh rate, the higher the refresh rate, the faster the display
Plug in the charger, the automatic display D + and D-voltage, the following shows the charger support the charging protocol
Press the menu button , automatically trigger quick charge voltage!