Description
Parameters:
Model: RF4 RF-H9
Product : hot air gun rework desoldering station
Power :1000W
HD LED large screen
With hang-up function
With Passive temperature runaway protection function
air volume range :P010-P100
temperature range: 100-500℃
With 4pcs straight air nozzles
Host Size: 167mm*117mm*145mm
Features:
RF4 RF-H9 direct air hot air gun rework station, passive temperature runaway protection, with temperature calibration, temperature range 100~500℃, air volume range: up to P010-P100
After use, stop heating when the handle is placed in the bracket and continue to blow air to cool the handle
When the handle temperature drops below 100℃, it will save the current temperature and airflow into standby
State display, pick up the handle immediately into the working state
Passive temperature runaway protection: when the temperature of the air gun is higher than the set temperature of 100C, the passive temperature runaway protection function is activated, and the power supply of the heater core is cut off directly
Function :
1.Passive temperature out of control protection
When the temperature of the air gun is higher than the set temperature by 100℃, the passive temperature out of control protection function is activated and the power supply of the heating core is directly disconnected.
2. Hang-up function: After use, the handle stops heating when it is placed in the bracket, and continues to blow air to cool the handle. When the handle temperature drops below 100°C, the current temperature and air volume are saved and the standby state is displayed ("---"), and the handle can be picked up to enter the working state immediately.
Temperature calibration:
① Press and hold the temperature adjustment knob and turn on the power switch to enter the temperature calibration function,
② Adjust the temperature adjustment knob to increase or decrease the temperature by ±90℃. Temperature unit conversion (tap the knob to select the temperature unit for conversion)
Temperature adjustment:
① The factory default temperature knob adjustment unit step is "1". When adjusting the temperature, the unit changes and flashes. It returns to the original state after 2 seconds without adjustment;
② Press the temperature adjustment knob to select the adjustment number (units/tens) step is 1. When a digit is selected, the digit flashes.
It stops flashing and starts working after 2 seconds without adjustment:
③ The temperature adjustment does not remember the current digit (units/tens).
Each temperature adjustment step starts from the unit.
Package includes:
1 x Main host
1 x Hot Air Gun Handle
4 x Nozzle
1 x Handle Holder
1 x Power Cable
