Description
The YOUKILOON V007 Pro VoltClip tool allows you to disassemble the iPhone 16 without causing any damage by debonding the battery adhesive. The iPhone 16/16 Plus's electrically-activated adhesive can be removed with the VoltClip tool V007 Pro battery adhesive removal cable. makes it easy and safe to remove the battery from an iPhone 16/16 Plus. It increases the efficiency of iPhone 16 breakdown.
One option is the V007 Pro VoltClip Quick Removing Adhesive Battery Cable.
2. Dual alligator clips for removing the 9V battery connector from the iPhone 16/16 Plus. A battery bank or power supply with a 5–20V output is necessary.
Why is the VoltClip tool necessary for removing the glue from the iPhone 16/16 Plus battery?
1. The V007 Pro VoltClip uses "electrical debonding on demand" technology to remove the adhesive from the iPhone 16/16 Plus. A USB-C Power Delivery (PD) power source is necessary for the VoltClip.
2. A little electrical current is passed through the glue to accomplish electrical debonding-on-demand. The adhesive is coupled across a 9–30 volt DC supply. and the adhesive bond is loosened in a matter of minutes by the electrochemical process that follows.
How should I utilise it?
1. Turn on the iPhone. Take off the screen of the iPhone 16/16 Plus.
2. Fasten the red alligator clip to the battery's silver tab.
3. Fasten the grounding screw to the black alligator clip.
4. Verify that no stray metallic surfaces are in contact with the red alligator clip.
5. Turn on the USB cord and give the adhesive 90 seconds to relax.
6. Unplug the power USB cable, and then unplug the alligator clips.
7. At this stage, the adhesive should be completely released. if the battery remains stationary during the process. Try again after reconnecting the VoltClip for another minute.
8. Lift the battery out of the frame by holding onto the silver tab.