Maintaining the functionality and lifespan of the iPhone, particularly with the iOS18 upgrade, depends on properly fixing the battery. Users can quickly modify the battery health and make sure the device receives the most accurate updates and performance thanks to the KC02S Battery Repair Device's straightforward and efficient solution.
Features and Advantages of the KC02S
Compatibility: Both recently released handsets and older models can use the KC02S Battery Repair Device for efficient battery repair because it works with iPhone 11 up to the most recent 15 PM models.
Battery Health Modification: Users can greatly enhance battery health by taking a few easy steps, like bringing the battery back to almost full charge (98% or 100%). This functionality is particularly crucial for maintaining devices' optimal performance.
Efficiency and data accuracy: The KC02S was created with data accuracy in mind, and its cycle counting feature guarantees that data is current and accurate. Additionally, its effective flash tools are compatible with third-party programs like iTunes, Shalou Assistant, and i2C Assistant, which further guarantees user-friendliness.
User-friendly design: The device's user interface is straightforward, easy to use, and intuitive. Its power starter cable ensures a secure and dependable connection process. It is also simple to transport and store on a daily basis due to its small size.
Detailed user manual
Step 1: Get Ready
Unplug the iPhone from its original power source.
Verify that the battery fits into the designated slot in the model and is positioned correctly in the KC02S.
- Select "Data Modification Mode" on the KC02S.
Step 2: Adjust Battery Data:
To choose the desired battery health value in "Single Modify" mode, press and hold the Adjustment button.
- Verify the modification while maintaining the same number of cycles.
Step 3: Connecting the Handset: Choose the power starting cord that comes with your device and use it.
Attach the cable's two ends to the iPhone and the KC02S USB port, respectively.
Use the USB cable to connect the phone to the computer.
Step 4: Verify Profile Changes: Verify that the new battery health status on your computer is at the predetermined level, such as 96%.
Step 5: Refresh the device by enabling the "Battery Keyboard Repair" option, choosing the appropriate iOS version, and opening the flashing software.
- Continue flashing until it is finished.
Step 6: Fixing Flash Issues
If the flash fails, reset by following the instructions.
Step 7: Complete the procedure - After the flash is finished, check the battery health once again to ensure that it has been updated to the desired value.
- To verify the battery repair, turn the device on.
Fixing issues and answering commonly asked questions
Flashing error: Make sure the device is connected correctly and that the flash utility parameters are configured correctly. Rebooting the phone may be required to fix the short-term problem.
Not updated data: Verify that the modification mode and switch position on the KC02S are configured correctly.
Issue with the connection: Make sure all of the wires are firmly attached and appropriate for the phone model.
